Kangvape TH-710 Box Mod Vaporizer 650mah
Kangvape TH-710 Vape Box Mod Kit: 510 Thread CBD Vaporizer 650mah Review
Kangvape TH-710 Instructions
Kangvape TH-710 Review
Kangvape TH-710 Kit is Kangvape's latest and most sophisticated cartridge/battery vape kit. The Kangvape TH-710 CBD Box Kit is available in seven distinctive color options which all feature illustrious blue trimming.
Each kit contains a TH-710 variable output battery and refillable glass oil cartridge which make for a fantastic result each time you vape.
There's no need to worry about running out of juice with the colossal 650mAh lithium-ion battery inside the Kangvape TH-710 CBD Vaporizer, but when it's time to charge up, you'll be notified by 10 flashes of the LED light. To charge the battery, simply connect the included cable to the unit and you'll have a full charge within a couple of hours. The light will glow blue when it is in charging mode and turn off when the unit is fully charged. The range of concentrates to play with is endless as the TH-710 has a wide output range of 3.0V-4.0V.
Adjusting the voltage setting on the TH-710 is easy! Just three clicks on the control button while the device is unlocked will cycle through the power modes. The current power setting will be indicated by the four different lights on the device (red 3.0V, blue 3.4V, green 3.7V, white 4.0V).
The four lights on this vape kit also indicate the remaining power of the battery. Whenever the power button is released, the LED will flash another time to show the remaining battery life (red <10%, blue 10-40%, green 40-70%, white 70-100%).
The TH-710 is compatible with most other cartridges up to 10.5mm in diameter. Changing the cartridge is as simple as dropping the cartridge into the port, or if you're not using a Kangvape cartridge, use the included magnetic ring adaptor.
The TH-710 CBD cartridge is constructed of top-quality glass which houses a 0.5ml tank to hold the vape juice. Each inhale from the TH-710 is jam packed with intense flavor, while every exhale allows you to create immense vape clouds thanks to the wickless ceramic core with four oil inlet filling ports.
The TH-710 Box Kit makes it even easier to enjoy your favorite oils wherever you are. The TH-710 stands at only 2.8 inches tall and just under 1.5 inches wide. And it's available in seven eye-catching color options!
Kangvape TH-710 Features
- 4 different voltage levels to choose from: 3.0V, 3.4V, 3.7V, 4.0V
- Micro USB charging port with cable included
- Built in 650mAh battery
- Incredible 15 Second Preheat time
- Oil chamber window for easy refill
- 5ml ceramic atomizer
- 510 thread
Kangvape TH-710 Box Specifications
- Available colors: Black, White, Red, Green, Purple, Blue
- Length38mm, Width 24mm, Height 72mm
- Diameter of mod hole 12mm
- 650mah battery size
- Atomizer Resistance:5ohm
- Atomizer Capacity:5ml
- Adjustable voltages: 3.0V, 3.4V, 3.7V, 4.0V
- 510 thread
Kangvape TH-710 Box Kit Package Includes
- 1×TH-710 box mod
- 1×K1 ceramic atomizer
- 1×magnet ring
- 1×USB cable
More Details About Kangvape TH-710
- Ergonomic design
The Kangvape TH-710 CBD Starter Kit features a high grade aluminium and zinc alloy chassis to create a lightweight and hard-wearing vape that can easily endure the daily grind. With an ergonomic, compact design, the Kangvape TH-710 features smooth, subtle lines and curved edges that make it feel great in the hand.
- AIOVape, Single Button Operation
The Kangvape TH-710 CBD Box Mod features an all-in-one vaporizing system fueled by a 650mAh rechargeable battery utilizing simple refillable atomizer cartridges. The device has only one button and a smart LED indicator to make operating the TH-710 super quick and easy. These features make the Kangvape TH-710 the perfect vape for someone who needs a nifty, simple starter kit. Not only is it easy to use but it's compatible with concentrates, CBD oils, and e-liquids.
- LED Battery Indicator
Located on the front of the Kangvape TH-710 just above the activation button, is an LED light battery indicator. The light shows four different colors which each correspond to how much battery is left on the device (red 10%, blue 10-40%, green 40-70%, white 70-100%).
- Refillable 0.5ml Cartridge System
It uses refillable cartridges with a maximum capacity of 0.5ml which are easy to change and refill. When using a brand-new cartridge, it is best to allow the device to sit with the new cartridge so the cotton wick can become completely saturated to ensure a quality vaping experience.
- Micro-USB Charging Port
Recharging this Kangvape vape kit is easy. To rejuvenate your battery, one end of the included micro-USB cable must be plugged into the micro-USB port at the bottom of the vape while the other end of the cable must be plugged into a USB port or wall adapter (sold separately).
- Perfect for Mouth-to-Lung Vaping
The Kangvape TH-710 is the ultimate all-in-one vape starter kit. It's designed for power users who enjoy an MTL vape. The unique design of the Kangvape TH-710 makes it perfect for usage with concentrates and oils that provide immense vapor output in a compact size.
Tips and Tricks for Kangvape TH-710 Problems
How to switch on/off the power of Kangvape TH-710?
To power the device on, press the fire button five times, the fire button light will turn on which means it is in vaping mode and is ready to deliver a big hit. To power the device off, simply press the fire button five times repeatedly within 2 seconds and the fire light will turn off, indicating that the device is powered off.
When to charge the Kangvape TH-710?
When in charging mode, the fire button will ignite blue. When fully charged, the light will turn off. To view the remaining battery life of the Kangvape TH-710, release the fire button after vaping and the LED will show one of the following colors:
- White 70-100% power
- Green 40-70% power
- Blue 10-40% power
- Red >10% power
How to adjust the power of Kangvape TH-710?
To adjust the power of the Kangvape TH-710, press the fire button three times to select one of the following voltage settings according to the LED light color:
- White 4.0V
- Green 3.7V
- Blue 3.4V
- Red 3.0V
If the current voltage is lower than 3.0V while powered on, the LED light will flash red 10 times. If this occurs, the battery needs to be charged.
How to preheat the Kangvape TH-710?
To preheat the TH-710, press the fire button twice, at which point the battery will begin warming up. The voltage during preheating is 2.2V and the preheating duration is 15 seconds.
What is the short-cut protection of Kangvape TH-710?
The device will power itself off if the output resistance is lower than 0.4ohm at any point. In the event that this does happen, the LED light will flash white three times and then power off.