Uwell Crown 3 Replacement Coils For Uwell Crown 3 (0.25/0.4/0.5Ohm)

Uwell Crown 3 Replacement Coils For Uwell Crown 3 (0.25/0.4/0.5Ohm) Instructions

Uwell Crown 3 Replacement Coils Instructions

Overview:

The Uwell Crown 3 Replacement Coils are the ideal replacements for the Uwell Crown 3 tank. The parallel structure of the coils creates the best vapor production and incredible flavor. Forget messing around by screwing and unscrewing coils, the Uwell Crown 3 replacement coils have a simple plug-pull installation method! Furthermore, they are made of stainless steel. That means they are compatible with mods using wattage mode plus temperature control mode.

Uwell Crown 3 Coils Specification:

• 0.25ohm resistance

Parallel Coil

SUS316

80W-90W recommended

Made from organic cotton

• 0.4ohm resistance

Quality Kanthal materials

55W-65W recommended

Made from organic cotton

• 0.5ohm resistance

Parallel Coil

SUS316

70W-80W recommended

Made from organic cotton

FAQ for Uwell Crown 3 Replacement Coils Problems

1. How to prime Uwell Crown 3 Coils?

Take the new coil from the pack. Take the juice bottle. Drip the e-juice onto the mesh (from above) through to the cotton. Drip a few drops at a time and then wait 10 minutes. The wicking holes on the side of the coils should be soaked. Continue to drip the e-juice until they become saturated.

2. How long do Uwell Crown 3 Coils last?

With moderate usage, the Uwell Crown replacement coils should last two to three weeks.

3. How to change coil on Uwell Crown 3?

• Gently unscrew the tank by hand
• Remove the top lid, ready for cleaning
• Remove the lower lid. The lower lid houses the coil in the tank. In removing the lower lid, you can take the coil out
• Take the old coil out of the tank
• Put the new coil into the tank. Ensure that the coil is in place securely

4. What tanks are Uwell Crown 3 Coils compatible with?

The Uwell Crown 3 Tank is the only compatible tank with the Uwell Crown 3 coils.